A permit expediter prepares, files and tracks a building permit application for an owner or builder. An expediter does not approve the permit, design the house or stamp plans. The city or county that issues the permit approves it, and the review runs on its own clock.
We did not find an official definition of the term, so the job looks different from one company to the next. This is what the job usually covers, and how to tell whether you need one.
What does a permit expediter do?
The work starts before anything is filed. An expediter reads what the city or county asks for, gathers those items from you, and checks the package against that list. Then the expediter submits the application and watches the status until the permit is issued.
A lot of the time goes to forms, PDFs and typing the same information into a portal. None of that work is hard, and one missed upload can still hold up the file.
The complaint we hear from permit clients is the wait: no word from the agency, and no clear sense of what a status change means or what comes next. Watching the status and explaining it is part of the job.
The other risk is the gap between people. Permits get rejected at review when something like zoning falls through the gap between the owner and the builder. Each side can assume the other one checked. Then the county says no, after the plans are drawn and the budget is set. Someone has to check the land use question before the building permit is filed.
What does a permit expediter not do?
An expediter is not a builder, an engineer or a surveyor, and the owner or the owner’s licensed builder makes every construction decision.
An expediter also cannot promise approval or a shorter review, because both belong to the agency. What an expediter can do is hand the agency a complete package that matches its checklist.
If your permit needs stamped engineering, your engineer prepares it and we handle the permit filing. Our building permit package does not include a site plan.
We also don’t file land use applications such as conditional use permits, rezoning, partitions or subdivisions. Deschutes County says planning permits cannot be applied for on Oregon ePermitting, so ask the county planning division where those applications go.
When does an owner need a permit expediter?
In many cases you can file your own permit. Deschutes County says homeowners can apply for permits on Oregon ePermitting, and it suggests you contact staff first to confirm the permit type. The state Building Codes Division says an online homeowner application includes a Homeowner Acknowledgement Form. Our Oregon ePermitting guide walks through the system.
Who issues your permit matters, because the portal and the rules change with the office. Here is where building permits are filed at the offices below.
| Office | Where the building permit is filed or issued |
|---|---|
| Deschutes County | Oregon ePermitting, on the state’s participating jurisdictions list |
| Crook County | Oregon ePermitting, and the Crook County FAQ says job locator card and inspection cards are picked up at the office after issuance |
| Jefferson County | Oregon ePermitting, on the same state list |
| City of Redmond | Oregon ePermitting, on the same state list |
| City of Bend | Its own Online Permit Center, not Oregon ePermitting |
| Sisters and La Pine | Deschutes County issues the building permit, and the city planning department reviews land use |
Deschutes County also issued building permits inside La Pine and Sisters in 2025, according to its annual report. It issued 369 new single-family dwelling permits that year: 280 in rural areas, 59 in La Pine and 30 in Sisters. Inside those two cities, the county says to contact the city planning department about land use. If your lot is somewhere else, check with the city or county that issues your permit.
Help makes sense when the forms take more time than you have, when you aren’t sure which permit type applies, or when the lot may need a land use decision first. It also makes sense when you would rather not check the portal for status yourself.
Ready to hand off the permit side? See our permitting service for land in Deschutes, Crook and Jefferson Counties.
What does a complete Deschutes County residential application need?
This is Deschutes County’s list. Crook County, Jefferson County and the cities set their own requirements, so check the county page for the current version and check with the office that issues your permit.
Property research comes first, and it is easy to skip. The county’s application guide for 1 and 2 family dwellings says you must have completed property research before you apply. The county’s research page says to verify the property is a legal lot of record and that your project meets land use requirements. DIAL, the county’s property lookup, helps with the property side.
The guide then lists what goes into the application:
- A site plan.
- Truss calculations and structural calculations, with a current engineer’s stamp where the guide calls for one.
- Construction plans, which cannot say “preliminary” or “not for construction.”
- Licenses associated to your ePermitting account. If you are filing as an owner, ask the county what applies to you.
The county’s site plan requirements ask for the whole property drawn in proportion, with every existing and proposed structure and septic system. They also ask for distances to property lines and the location of any easements.
Crook County’s building department adds that verifying property lines is the responsibility of the applicant, contractor or owner, which is another reason to check the lot before you file.
Why do building permit applications come back?
Three things can stall a file or send it back:
- An incomplete package. Deschutes County’s guide says incomplete applications will be withdrawn with an email to the applicant.
- A site plan missing items the county asks for, such as easements or the septic system.
- A land use question nobody asked. Some lots need land use requirements met through county planning before the building permit is filed, as the county’s research page lists.
We have seen an owner finish design and set a budget, then learn the lot needed a long planning approval first. That is one case and not a typical one, but it shows why the land use check belongs before the design is final.
How do you pick a permit expediter?
Put these questions to anyone you are considering:
- Which city or county do you file with? A company that files in Bend may not file in Crook County, and the portals are different.
- What does the package include, and what does it leave out? Check engineering, site plans and land use applications first.
- How do I authorize you, and how will I see the status as the file moves?
- When the status changes, how will you explain what it means and what comes next?
- What happens when the agency sends corrections, and does each round cost extra?
Be careful with anyone who promises approval or a faster review, because the agency controls both and no outside company can promise them.
How do we file a building permit at Sand & Sage?
We work on land in Deschutes, Crook and Jefferson Counties, and the steps are short. You sign an authorization in DocuSign. We submit the application electronically and track its status through review.
Your SiteFacts Report comes first, typically in 7 to 10 business days. Once we have it and your complete information, we submit within 5 business days. SiteFacts is a product of Sand & Sage Solutions LLC.
Every correction round is at no added fee. Bend building permit packages: from $1,250 (site plan not included).
If you own land in Deschutes, Crook or Jefferson County, we prepare and file your building permit package.
Building permit package submittals: from $750. A real person calls you within 24 business hours.
Quick answers
Does a permit expediter make the county approve faster?
No. The city or county that issues the permit approves it, and review runs on the agency’s schedule. What an expediter can affect is the package. Deschutes County says incomplete applications will be withdrawn.
Can I file my own building permit in Central Oregon?
Often, yes. Deschutes County says homeowners can apply on Oregon ePermitting. Bend uses its own Online Permit Center. Check with the city or county that issues your permit.
Does an expediter do the engineering or the site plan?
No. If your permit needs stamped engineering, your engineer prepares it and we handle the permit filing. Our building permit package does not include a site plan.
Do you file conditional use permits or rezoning?
No. We don’t file conditional use permits, rezoning, partitions or subdivisions. Ask the county planning division where a land use application goes.



